• Enclose Area with Folding gate for Storage
• Secure Cigarette, pharmacy and other costly merchandise with use of folding gate .
• Folding gate Enclosure for your precious inventory
• Gate can mounted with top sliding track for easy opening.
• Two side and Top Ceiling of cage can enclosed by folding gate or wire mesh panel.

The Most effective way to secure Food, Pharmacy, Restaurant, medical office counter with folding gate.

Easy to install

Easy to Operate

Folding Gate are Low cost than Rolling Grille, rolling shutter and Sliding grille

Steel Folding gate for high security

• Easy to Install : Directly Mount Folding gate on Store Front Window Frame , No Drilling on Floor
• Collapse and Fold Away : It collapse and fold away 180 degree so In Day Time , you can Show your Products through Window.
• Door can be secured with narrow diamond opening, so it will be difficult for someone to put their hand through and open lock from outside
• If Door Handle is protruding in , than you can install our gate with angle bracket and Post to easily Operate.
• 25 Sizes of Folding gate and all necessary accessories readily available to meet your storefront security project.
• Powder Coated finish for added weather resistance and more aethetic looks.

Steel Powder coated gate for Security and Rust Protection

Folding Gate provides security, aesthetics and easy to operate for patio door and french door applications.

It is mounted on one side with hinges  and lock to other side.

It mounts on two side with Post for added security and slides with caster wheel at front end bottom

Standard Installation material :

How to Measure Work Site and What components I will need to Install Folding Gate?

• Why Our Folding Gate?
  • Our Folding Gate are made of Heavy Duty Steel Tubing , NOT "U" channels.
  • You can mount “Left to Right” or “Right to Left”
  • You can Mount Interior or Exterior side of building.
  • You can mount our folding gate as Single gate, Pair Gate, Double Gate ,multiple gate and mobile barrier.
  • We have one of largest collection of accessories and hardware to meet most critical installation requirement
  • You can choose various locking options : Padlock, Push Lock, Cylinder- Deadbolt Lock, Thumb turn.
  • Our folding Gate is Powder Coated thus make attractive to use in commercial and Residential Places.
  • Our Folding gate comes with two hinges so in most cases you can mount it directly on window or door frame and you may not need to drill hole on bottom of window or door frame.
• Our Folding Gate can be installed direct on Window frame, Door frame, Any Wall Opening and Counter Opening
• Measurement for Window: Measure Opening Width and Height in inches for each window.
• What I will need for Window? : 1 Appropriate Size folding gate, Caster Wheel, Lock , Lock Standoff Bracket (For Face of Frame Mount ).

• Measurement for Commercial Door: Measure Opening Width frame to frame .and Height from floor to bottom of door closer. (If there is door closer on top of door is mounted, you should measure below door closer to mount gate below door closer.) Is Handle Protruding out of Door frame? If So than you need to Mount Gate on Post with Standoff Bracket.
  • For Two gate Closing in Middle  : 2 Appropriate Size folding gate, 2 Caster Wheel, 1Lock or Locking Post (recommended), 2 Post , 2 Feet bracket, 1 Deep “U” Bracket, 1 Deep “T” Bracket, 1 Shoot Bolt, 1 Shoot Bolt Socket.
  • For Single Gate Closing on One Side  : 1 Appropriate Size gate, 1 Caster Wheel, 1Lock or Locking Post (recommended), 2 Post , 2 Feet bracket

• What I will need for Single Commercial Door? : 1 Appropriate Size folding gate, 1 Caster Wheel, 1Lock or Locking Post (recommended), 1 Lock Stand Off Bracket, 2 Post , 2 Feet bracket, 2 Angle Bracket  (If you have Door Handle Protruding out, than  Post , Angle Bracket and Feet Bracket keeps Gate Away from Door).
• What I will need for Double Commercial Door? :
  • For Two gate Closing in Middle  : 2 Appropriate Size folding gate, 2 Caster Wheel, 1Lock or Locking Post (recommended), 2 Post , 2 Feet bracket, 2 Angle Bracket (Stand Off)  (If you have Door Handle Protruding out, than  Post , Angle Bracket and Feet Bracket keeps Gate Away from Door ). 1 Deep “U” Bracket, 1 Deep “T” Bracket, 1 Shoot Bolt, 1 Shoot Bolt Socket
  • For Single Gate Closing on One Side  : 1 Appropriate Size folding gate, 1 Caster Wheel, 1Lock or Locking Post (recommended), 1 Lock Stand Off Bracket, 2 Post , 2 Feet bracket, 2 Angle Bracket  (If you have Door Handle Protruding out, than  Post , Angle Bracket and Feet Bracket keeps Gate Away from Door )
• Measurement for Clear Opening Area ( Partition Entrance) : Opening Width and Opening Height
• What I will need for Clear Opening Area ( Partition Wall Entrance):

• For Two gate Closing in Middle  : 2 Appropriate Size folding gate, 2 Caster Wheel, 1Lock or Locking Post (recommended), 2 Post , 2 Feet bracket, 1 Deep “U” Bracket, 1 Deep “T” Bracket, 1 Shoot Bolt, 1 Shoot Bolt Socket.
• For Single Gate Closing on One Side  : 1 Appropriate Size gate, 1 Caster Wheel, 1Lock or Locking Post (recommended), 2 Post , 2 Feet bracket

• For Counter Opening Same as Above
• Measurement for Patio Door Opening : Opening Width and Opening Height Brick to Brick
• What I will need for Patio Door Opening : 1 Appropriate Size gate, 1 Caster Wheel, 1Lock or Locking Post (recommended), 2 Post , 2 Feet bracket, 1 Lock Standoff Bracket
• Our Folding gate can be used to create Fixed or mobile barrier with Mobile Trolley. Folding Gate as Mobile Barrier, Mobile Trolley is required on both side of gate.
• Measurement of Mobile Barrier  ( For Dividing Two Area ) : Opening Width, Opening Height
• What I will need for Mobile Barrier
  • For Fixed System from both side  : 2 Post , Gate, Mobile Trolley , Shoot Bolt Socket, Padlock, Push Locks (All Hardware Quantity depend on total width of system)
  • For Movable System from Both Side : 2 Post , Gate, Mobile Trolley , Shoot Bolt Socket, Pad Lock, Push Locks (All Hardware Quantity depend on total width of system)
• For Special Type of Installation You may need More Hardware and Accessories. Please send us some images of the area where you would like to install folding gate with measurements, we will recommend accessories and provide you complete quote.

This document is for Guidance Purpose, Actual Requirement may vary depend on work Site. Metal, Concrete and Wood Self Drilling Screws will require depend upon job site conditions. You may need tools like metal cutting Saw and Drill driver, hammer, etc..Please wear all necessary safety wear during Installation.

• Folding Gate Size and Price

• Folding Gate Price list-PDF

• Folding Gate Accessories

• Folding gate Installation Guide

• How to Measure and select accessories

Technical Specifications

Part 1  General

1.01 General

A. Supply and install where indicated folding aluminum closure model “FlexGuard” as supplied  by Vrinda Inc.

TELEPHONE    1-877-874-6321

FAX               1-877-874-6564

1.02 Exclusions

A. Work not included in this section. Preparation of the opening, overhead track supports, storage pockets, miscellaneous trim and field painting.

1.03 Submittals

A. Submittals (shop drawings, installation instructions, operation and maintenance instructions) shall be in accordance with general instructions.

Part 2  Product

2.01 Model type

A. “FlexGuard” by VRINDA Inc.

2.02 Curtain

A. The top and bottom of each section is fitted with an aluminum panel 4” (101mm) high. This panel consists of an aluminum extrusion 1/16”(1.6mm) thick and composed of modules with a 15° angle between them to facilitate the operation of the closure. The curtain is constructed of 6” (152mm) wide modules linked together by a continuous aluminum hinge. These hinges are connected with horizontal aluminum extrusions 6” x 1” x 6” spaced at 12” centers in a straight pattern. 5/16” aluminum rods to be concealed by 1/2” aluminum sleeves between hinge system, clear aperture of 2 1/4”.

2.03     Locking.

A. Lead post shall be equipped with a hook bolt lock with VRINDA cylinders each side.

B. Lead post shall engage a full height wall jamb.

C. Trailing post shall be self-locking at the top and bottom inside the storage pocket.

D. Free floating intermediate posts shall be located at all curves and at intervals not exceeding 10 feet (3M), 6 feet (2M) for counter top units. Intermediate posts shall be equipped with self-adjusting spring loaded drop bolts activated from the inside

only. Drop bolts shall engage dust proof stainless steel receptacles.

2.04     Track

A. Curtain shall be hung from an overhead track 1-5/16” (33mm) wide by 1-9/16” (40mm) high. Track shall be aluminum 6351 alloy tempered to T6.

B. Curves where required shall be 14” (355mm) radius standard.

2.05     Stacking

A. Stacking shall not exceed a depth of 1.15” per foot of closure width plus 3” for each post (lead, end or intermediate). (95mm/lin. M. + 76mm per post). Full egress doors add 7” (176mm).

2.06     Finish

A. Finish shall be standard (clear anodized or acrylic paint in white, black, medium bronze #40, light bronze #26.

Part 3  Installation

3.01 Inspection

A. Verify that all preparation work has been completed by other trades.

B. Verify dimensions of opening prior to installation.

3.02     Installation

A. Closure as per printed instructions from VRINDA and approved shop drawing.

B. Clean and adjust closure to ensure smooth operation.

Options

Track (section 2.04)

l 10” (255mm) radius curves (indicate location on plans).

l Special radius curves (indicate location and radius on plans).

Locking (section 2.03)

Finish (section 2.06)

Architect may select special finish. (Extra cost).

Egress compliance

FoldingSecurityGate.com Terms of Use

This Web site is operated by Vrinda Inc. Throughout the site, the terms "we," "us" and "our" refer to Vrinda Inc. Vrinda Inc offers this Web site, including all information, tools and services available from this site, to you, the user, conditioned upon your acceptance of all the terms, conditions, policies and notices stated here. Your use of this site constitutes your agreement to these Terms of Use.

Accuracy, Completeness and Timeliness of Information on This Site

Vrinda Inc is not responsible if information made available on this site is not accurate, complete or current. The material on this site is provided for general information only and should not be relied upon or used as the sole basis for making decisions without consulting primary, more accurate, more complete or more timely sources of information. Any reliance on the material on this site is at your own risk. This site may contain certain historical information. Historical information necessarily is not current and is provided for your reference only. We reserve the right to modify the contents of this site at any time, but we have no obligation to update any information on the site. You agree that it is your responsibility to monitor changes to the site.

Use of Materials on the Site

All content on this site (including, without limitation, text, design, graphics, logos, icons, images, audio clips, downloads, interfaces, code and software, as well as the selection and arrangement thereof), is the exclusive property of and owned by Vrinda Inc, its licensors or its content providers and is protected by copyright, trademark and other applicable laws. You may access, copy, download and print the material contained on the site for your personal and non-commercial use, provided you do not modify or delete any copyright, trademark or other proprietary notice that appears on the material you access, copy, download or print. Any other use of content on the site, including but not limited to the modification, distribution, transmission, performance, broadcast, publication, uploading, licensing, reverse engineering, transfer or sale of, or the creation of derivative works from, any material, information, software, products or services obtained from the site, or use of the site for purposes competitive to Vrinda Inc, is expressly prohibited. You agree to abide by all additional restrictions displayed on the site as it may be updated from time to time. Vrinda Inc reserves the right to refuse or cancel any person's registration for this site, remove any person from this site or prohibit any person from using this site for any reason whatsoever. Vrinda Inc, or its licensors or content providers, retain full and complete title to the material provided on the site, including all associated intellectual property rights, and provide this material to you under a license that is revocable at any time in Vrinda Inc's sole discretion. Vrinda Inc neither warrants nor represents that your use of materials on this site will not infringe rights of third parties not affiliated with Vrinda Inc.

You may not use contact information provided on the site for unauthorized purposes, including marketing. You may not use any hardware or software intended to damage or interfere with the proper working of the site or to surreptitiously intercept any system, data or personal information from the site. You agree not to interrupt or attempt to interrupt the operation of the site in any way. Vrinda Inc reserves the right, in its sole discretion, to limit or terminate your access to or use of the site at any time without notice. Termination of your access or use will not waive or affect any other right or relief to which Vrinda Inc may be entitled at law or in equity.

Materials You Submit

You acknowledge that you are responsible for any material you may submit via the site, including the legality, reliability, appropriateness, originality and copyright of any such material. You may not upload to, distribute or otherwise publish through this site any content that (i) is confidential, proprietary, false, fraudulent, libellous, defamatory, obscene, threatening, invasive of privacy or publicity rights, infringing on intellectual property rights, abusive, illegal or otherwise objectionable; (ii) may constitute or encourage a criminal offense, violate the rights of any party or otherwise give rise to liability or violate any law; or (iii) may contain software viruses, political campaigning, chain letters, mass mailings, or any form of "spam." You may not use a false email address or other identifying information, impersonate any person or entity or otherwise mislead as to the origin of any content. You may not upload commercial content onto the site.

If you do submit material, and unless we indicate otherwise, you grant Vrinda Inc and its affiliates an unrestricted, nonexclusive, royalty-free, perpetual, and irrevocable and fully sub licensable right to use, reproduce, modify, adapt, publish, translate, create derivative works from, distribute and display such material throughout the world in any media. You further agree that Vrinda Inc is free to use any ideas, concepts, know-how that you or individuals acting on your behalf provide to Vrinda Inc. You grant Vrinda Inc and its affiliates the right to use the name you submit in connection with such material, if they so choose. All personal information provided via this site will be handled in accordance with the site's online Privacy Policy. You represent and warrant that you own or otherwise control all the rights to the content you post; that the content is accurate; that use of the content you supply does not violate any provision herein and will not cause injury to any person or entity; and that you will indemnify Vrinda Inc for all claims resulting from content you supply.

Conduct on the Site

Some features that may be available on this site require registration. By registering at and in consideration of your use of the site you agree to provide true, accurate, current and complete information about yourself.

Some features on this site require use of a password. You are responsible for protecting your password. You agree that you will be responsible for any and all statements made, and acts or omissions that occur, through the use of your password. If you have any reason to believe or become aware of any loss, theft or unauthorized use of your password, notify Vrinda Inc immediately. Vrinda Inc may assume that any communications GE receives under your password have been made by you unless Vrinda Inc receives notice otherwise.

You or third parties acting on your behalf are not allowed to frame this site or use our proprietary marks as meta tags, without our written consent. These marks include, but are not limited to, Vrinda Inc, GlassEssential, SecurityWindowBars, WireMeshSecurity, FoldingSecurityGate and Metal-Casting-Machining. You may not use frames or utilize framing techniques or technology to enclose any content included on the site without Vrinda Inc's express written consent. Further, you may not utilize any site content in any meta tags or any other "hidden text" techniques or technologies without Vrinda Inc’s express written consent.

Links

This site may contain links to other Web sites, some of which are operated by Vrinda Inc or its affiliates and others of which are operated by third parties. These links are provided as a convenience to you and as an additional avenue of access to the information contained therein. We have not necessarily reviewed all the information on those other sites and are not responsible for the content of those or any other sites or any products or services that may be offered through those or any other sites. Inclusion of links to other sites should not be viewed as an endorsement of the content of linked sites. Different terms and conditions may apply to your use of any linked sites. Vrinda Inc is not responsible for any losses, damages or other liabilities incurred as a result of your use of any linked sites.

Trademarks and Copyrights

Trademarks, logos and service marks displayed on this site are registered and unregistered trademarks of Vrinda Inc, its licensors or content providers, or other third parties. All of these trademarks, logos and service marks are the property of their respective owners. Nothing on this site shall be construed as granting, by implication, estoppels, or otherwise, any license or right to use any trademark, logo or service mark displayed on the site without the owner's prior written permission, except as otherwise described herein. Vrinda Inc reserves all rights not expressly granted in and to the site and its content. This site and all of its content, including but not limited to text, design, graphics, interfaces and code, and the selection and arrangement thereof, is protected as a compilation under the copyright laws of the United States and other countries.

Infringement Notice

We respect the intellectual property rights of others and request that you do the same. You are hereby informed that Vrinda Inc has adopted and reasonably implemented a policy that provides for the termination in appropriate circumstances of subscribers and account holders of Vrinda Inc's system or network who are repeat copyright infringers. If you believe your copyright or the copyright of a person on whose behalf you are authorized to act has been infringed, you may notify us:

Chirag Shah

Vrinda Inc

(519) 780-2527

vrinda.canada@gmail.com

To be effective, your notification must (i) be in writing, (ii) be provided to our copyright agent, and (iii) include substantially the following:

A physical or electronic signature of a person authorized to act on behalf of the owner of an exclusive right that is allegedly infringed;

Identification of the copyrighted work claimed to have been infringed, or, if multiple copyrighted works at a single online site are covered by a single notification, a representative list of such works at that site;

Identification of the material that is claimed to be infringing or to be the subject of infringing activity and that is to be removed or access to which is to be disabled, and information reasonably sufficient to permit the service provider to locate the material;

Information reasonably sufficient to permit the service provider to contact the complaining party, such as an address, telephone number, and, if available, an electronic mail address at which the complaining party may be contacted;

A statement that the complaining party has a good faith belief that use of the material in the manner complained of is not authorized by the copyright owner, its agent, or the law; and

A statement that the information in the notification is accurate, and under penalty of perjury, that the complaining party is authorized to act on behalf of the owner of an exclusive right that is allegedly infringed.

Vrinda Inc is under no obligation to post, forward, transmit, distribute or otherwise provide any material available on this site, including material you provide to us, and so we have an absolute right to remove any material from the site in our sole discretion at any time.

DISCLAIMERS

YOUR USE OF THIS SITE IS AT YOUR SOLE RISK. THE SITE IS PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS. WE RESERVE THE RIGHT TO RESTRICT OR TERMINATE YOUR ACCESS TO THE SITE OR ANY FEATURE OR PART THEREOF AT ANY TIME. GE EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ANY WARRANTIES THAT MATERIALS ON THE SITE ARE NONINFRINGING, AS WELL AS WARRANTIES IMPLIED FROM A COURSE OF PERFORMANCE OR COURSE OF DEALING; THAT ACCESS TO THE SITE WILL BE UNINTERRUPTED OR ERROR-FREE; THAT THE SITE WILL BE SECURE; THAT THE SITE OR THE SERVER THAT MAKES THE SITE AVAILABLE WILL BE VIRUS-FREE; OR THAT INFORMATION ON THE SITE WILL BE COMPLETE, ACCURATE OR TIMELY. IF YOU DOWNLOAD ANY MATERIALS FROM THIS SITE, YOU DO SO AT YOUR OWN DISCRETION AND RISK. YOU WILL BE SOLELY RESPONSIBLE FOR ANY DAMAGE TO YOUR COMPUTER SYSTEM OR LOSS OF DATA THAT RESULTS FROM THE DOWNLOAD OF ANY SUCH MATERIALS. NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED BY YOU FROM VRINDA OR THROUGH OR FROM THE SITE SHALL CREATE ANY WARRANTY OF ANY KIND. GE DOES NOT MAKE ANY WARRANTIES OR REPRESENTATIONS REGARDING THE USE OF THE MATERIALS ON THIS SITE IN TERMS OF THEIR COMPLETENESS, CORRECTNESS, ACCURACY, ADEQUACY, USEFULNESS, TIMELINESS, RELIABILITY OR OTHERWISE.

IN CERTAIN JURISDICTIONS, THE LAW MAY NOT PERMIT THE DISCLAIMER OF WARRANTIES, SO THE ABOVE DISCLAIMER MAY NOT APPLY TO YOU.

LIMITATION OF LIABILITY

YOU ACKNOWLEDGE AND AGREE THAT YOU ASSUME FULL RESPONSIBILITY FOR YOUR USE OF THE SITE. YOU ACKNOWLEDGE AND AGREE THAT ANY INFORMATION YOU SEND OR RECEIVE DURING YOUR USE OF THE SITE MAY NOT BE SECURE AND MAY BE INTERCEPTED BY UNAUTHORIZED PARTIES. YOU ACKNOWLEDGE AND AGREE THAT YOUR USE OF THE SITE IS AT YOUR OWN RISK AND THAT THE SITE IS MADE AVAILABLE TO YOU AT NO CHARGE. RECOGNIZING SUCH, YOU ACKNOWLEDGE AND AGREE THAT, TO THE FULLEST EXTENT PERMITTED BY APPLICABLE LAW, NEITHER VRINDA NOR ITS AFFILIATES, SUPPLIERS OR THIRD PARTY CONTENT PROVIDERS WILL BE LIABLE FOR ANY DIRECT, INDIRECT, PUNITIVE, EXEMPLARY, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR OTHER DAMAGES ARISING OUT OF OR IN ANY WAY RELATED TO THE SITE, OR ANY OTHER SITE YOU ACCESS THROUGH A LINK FROM THIS SITE OR FROM ANY ACTIONS WE TAKE OR FAIL TO TAKE AS A RESULT OF COMMUNICATIONS YOU SEND TO US, OR THE DELAY OR INABILITY TO USE THE SITE, OR FOR ANY INFORMATION, PRODUCTS OR SERVICES ADVERTISED IN OR OBTAINED THROUGH THE SITE, GEAS REMOVAL OR DELETION OF ANY MATERIALS SUBMITTED OR POSTED ON ITS SITE, OR OTHERWISE ARISING OUT OF THE USE OF THE SITE, WHETHER BASED ON CONTRACT, TORT, STRICT LIABILITY OR OTHERWISE, EVEN IF GE, ITS AFFILIATES OR ANY OF ITS SUPPLIERS HAS BEEN ADVISED OF THE POSSIBILITY OF DAMAGES. THIS DISCLAIMER APPLIES, WITHOUT LIMITATION, TO ANY DAMAGES OR INJURY ARISING FROM ANY FAILURE OF PERFORMANCE, ERROR, OMISSION, INTERRUPTION, DELETION, DEFECTS, DELAY IN OPERATION OR TRANSMISSION, COMPUTER VIRUSES, FILE CORRUPTION, COMMUNICATION-LINE FAILURE, NETWORK OR SYSTEM OUTAGE, YOUR LOSS OF PROFITS, OR THEFT, DESTRUCTION, UNAUTHORIZED ACCESS TO, ALTERATION OF, LOSS OR USE OF ANY RECORD OR DATA, AND ANY OTHER TANGIBLE OR INTANGIBLE LOSS. YOU SPECIFICALLY ACKNOWLEDGE AND AGREE THAT NEITHER GE NOR ITS SUPPLIERS SHALL BE LIABLE FOR ANY DEFAMATORY, OFFENSIVE OR ILLEGAL CONDUCT OF ANY USER OF THE SITE. YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY OF THE ABOVE CLAIMS OR ANY DISPUTE WITH VRINDA IS TO DISCONTINUE YOUR USE OF THE SITE. YOU AND VRINDA AGREE THAT ANY CAUSE OF ACTION ARISING OUT OF OR RELATED TO THE SITE MUST COMMENCE WITHIN ONE (1) YEAR AFTER THE CAUSE OF ACTION ACCRUES OR THE CAUSE OF ACTION IS PERMANENTLY BARRED. BECAUSE SOME JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, OR THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, ALL OR A PORTION OF THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

Indemnification

You agree to indemnify, defend and hold harmless Vrinda Inc and its affiliates and their officers, directors, employees, contractors, agents, licensors, service providers, subcontractors and suppliers from and against any and all losses, liabilities, expenses, damages and costs, including reasonable attorneys' fees and court costs, arising or resulting from your use of the site and any violation of these Terms of Use. If you cause a technical disruption of the site or the systems transmitting the site to you or others, you agree to be responsible for any and all losses, liabilities, expenses, damages and costs, including reasonable attorneys' fees and court costs, arising or resulting from that disruption. Vrinda Inc reserves the right, at its own expense, to assume exclusive defense and control of any matter otherwise subject to indemnification by you and, in such case, you agree to cooperate with Vrinda Inc in the defense of such matter.

Jurisdiction and Applicable Law

The laws of the Province of Ontario govern these Terms of Use and your use of the site, and you irrevocably consent to the jurisdiction of the courts located in the County of Ontario for any action arising out of or relating to these Terms of Use. We recognize that it is possible for you to obtain access to this site from any jurisdiction in the world, but we have no practical ability to prevent such access. This site has been designed to comply with the laws of the Province of Ontario and of the Canada. If any material on this site, or your use of the site, is contrary to the laws of the place where you are when you access it, the site is not intended for you, and we ask you not to use the site. You are responsible for informing yourself of the laws of your jurisdiction and complying with them.

Changes to These Terms of Use

Vrinda Inc reserves the right, at its sole discretion, to change, modify, add or remove any portion of these Terms of Use, in whole or in part, at any time, by posting revised terms on the site. It is your responsibility to check periodically for any changes we make to the Terms of Use. Your continued use of the site after any changes to the Terms of Use or other policies means you accept the changes.

In the event we make material changes to the Terms of Use, notice of the changes will be posted on the homepage of this Web site and the revised terms will take effect thirty days after their publication on the site.

Entire Agreement and Admissibility

This agreement and any policies or operating rules posted on this site constitute the entire agreement and understanding between you and Vrinda Inc with respect to the subject matter thereof and supersede all prior or contemporaneous communications and proposals, whether oral or written, between the parties with respect to such subject matter. A printed version of these Terms of Use shall be admissible in judicial or administrative proceedings based on or relating to use of the site to the same extent and subject to the same conditions as other business documents and records originally generated and maintained in printed form.

Severability

If any provision of this agreement is unlawful, void or unenforceable, the remaining provisions of the agreement will remain in place.

How to Contact Us

If you have any questions or comments about these Terms of Use or this site, please contact us by:

Emailing us at: vrinda.canada@gmail.com

Calling us at: +1 519 780 2527 or

Writing us at: Corporate Trademark Department

Vrinda Inc

10 Whispering Ridge Dr

Guelph, ON N1G 3Z6

Thank you for visiting our site.

#1.Wall Channel - A full height extruded piece of aluminum that the Lead Post fits and locks into. This Channel is secured permanently to the wall.
#2. Lead Post - With cylinders interior and exterior activating hook bolt lock engaging wall channel.
#3 . Bi-Part - Joins together two sections of Roll and Folds. With cylinders interior/exterior.
#12 Bi-Part with Drop Bolt - With cylinders interior and/or exterior
#13 Mounting Tube - 2 in. x 3 in. x 6 ft. 8 in. steel tube with 6 in. x 6 in. steel floor base.

A      Hinges - 1/4 in. thick steel plate hinge system.
B     Finish - Clear anodized aluminum.
C     Wheels -
D     Anti-Sway Latch - Aids in moving Roll & Fold from storages to secured position

Typical layout

Typical layout connects to wall at one end and mounting tube at other end.
Layout can have multiple sections.

Layouts with more than seven sections should be bi-parted into two sections.

Quick Details Folding Barrier Model: Perforated Panels

A     Partition Width 36 in. or 42 in.
B     Partition Height 6 ft. 6 in.
C     Powder Coated Steel Hinges.
D     Wheels 2 in. Non Marring.
E     2 1/4 in. FFL
F     Perforation Detail 3/16 in.

Quick Details :Folding Barrier Model: Clear Polycarbonate

A     Partition Width 36 in. or 42 in.
B     Partition Height 6 ft. 6 in.
C     Powder Coated Steel Hinges.
D     Wheels 2 in. Non Marring.
E     2 1/4 in. FFL

Folding Barrier Model: Rod Link Straight Pattern Quick Details

A     Partition Width 36 in. or 42 in.
B     Partition Height 6 ft. 6 in.
C     Powder Coated Steel Hinges.
D     Wheels 2 in. Non Marring.
E     2 1/4 in. FFL

Application for Portable freestanding light security Crowd Control and  pedestrian traffic  control.

Our Folding Barrier is unique free-standing design which requires no ceiling or floor track and quickly positions into place. It stores easily in the opening or can be rolled to a convenient remote location.

FREE STANDING MOVABLE FOLDING BARRIER PARTITION

Engineered for pedestrian traffic control, Crowd Control and light security, Folding Barrier Partition is especially effective for those difficult to solve situations, particularly where structural or decorative obstructions exist or where there are high, arched or open ceilings.pedestrian control and light security. It is extremely useful in areas that have extremely high ceilings or floors that should not be drilled into. One example; airport kiosks, another is to close off access to a mall after hours while the movie theater is still open. A very popular one is a store within a store that has shorter hours then the host store.

ADVANTAGES:

Folding Barrier advantages  are numerous:

Folding Gate Applications. Endless Possibilities  with Folding Gate

Install Left or Right

Install Interior or exterior

Install at window or door or shipping door or  Mobile trolly or counter or mezanine and more

All Hardware readily available to meet your requirements ..

• Folding Gate Size and Price

• Folding Gate Price list-PDF

• Folding Gate Accessories

• Folding gate Installation Guide

• How to Measure and select accessories
  

Series 140

Closet-Utility-Wardrobe Accodion Door

The 140 series accordion door is recommended for closets, utility rooms, storage rooms, or wardrobe areas where a door with "one finished side" is appropriate.
Why use an accordion door for a closet door?
To provide an extended opening as accordion doors take on a compact profile when not in use. This accordion door has been designed to be used in situations where long-term durability is required from dorm rooms to health care facilities.

Series 220

Room Divider Accordion Door

The 220 series accordion door is utilized in situations where both sides need to be visible making this door a perfect residential room divider. Accordion door room dividers have been used to separate living rooms from dining rooms, lofts from the rooms below and many other applications. The 220 series doors combined with the 140 series are used in many types of commercial facilities where long-term durability is required.

Series 240

Commercial-Residential Folding Door

The 240 series accordion doors or folding doors, provide you with many configurations and options to make this door truly a custom accordion door. Match the surrounding Paint, wood, or laminate With our factory custom finishes or by using your paint or stain. The 240 series accordion divider provides a functional way to easily divide a single space or spaces. Accordion doors are economical, easy to install, and most importantly they can be fabricated to any custom size.

Series 440

Commercial-Residential Folding Door

Clear Acrylic Accordion Door The 440 series is transparent and generally used in combinations with the 240 series, the 640 series, or the 740 series to add visibility to an area. This series accordion door is recognized as a barrier while keeping the area visually open.

Series 540

Clear Acrylic Security Accordion Door

The 540 series is designed to provide an attractive and aesthetic divider or security door by incorporating the many design benefits desired in retail, industrial, or hospitality settings.

Series 640

Aluminum Panel Divider

The 640 series is great for adding the modern feel of metal to the home or as an industrial barrier to divide a work area as needed.

Series 740

Aluminum Panel Security Accordion Door

The 740 series is used as a store front or as a barrier in many industrial settings. An accordion security door made with solid or perforated aluminum panels that offer a high level of security for the protection you desire.

Series 2100

Acoustical Accordion Door

The 2100 series acoustical folding door is a prefect way to reduce undesirable sound with minimal cost. This type of acoustical accordion door has been used in restaurants, offices, homes, theaters, and churches. In addition to its acoustical sound reduction properties this series has an highly efficient perimeter seal to reduce heat loss from one area to another.

Series 3300

Acoustical Accordion Room Partition

The 3300 series acoustical accordion door combines our proven durable hardware hinge system, rigid MDF body panels, and a sound liner to create a dual walled sound partition. Practical applications for the 3300 series include offices, churches and restaurants where moderate sound control is desired, along with the flexibility and convenience of an accordion style partition featuring solid panels.

Finish

• The series 140, 220, 240, 2100, and 3300 accordion door panels are available with 14 standard vinyl-laminate colors and 6 hardwood choices along with optional decorative murals. The greatest advantage to our accordion doors is that they can be fabricated unfinished and ready for staining or can be primed for your paint. Special paint finishes can be applied at the factory and we can even match existing colors and finishes. Optional Laminates can be applied such as Formica, Wilsonart, Pionite, and Navamar.
• The 440 and 540 series accordion door panels are available in the colors clear or bronze.
• The 640 and 740 series accordion door panels are available in the colors clear aluminum, bronze colored aluminum, or gold colored aluminum.
• The greatest advantage to our custom accordion folding doors is that you can have them made using any of the 240, 440, or 640 series of panels combined.
  

• FAQs

Read more...

Read more...

Acoustic Partitions

• Series 2100 Wood Fording Accordion Shutter Doors
• Series 3300 Wood Fording Accordion Shutter Doors

• FAQs

Read more...

Talk about flexible! Wood folding commercial series of Accordion shutter Doors does it all: saves space and separates work areas in an office … reconfigures a too-large meeting room in a hotel … helps muffle distracting noise in a daycare center or restaurant. Yes, our Accordion Doors do all that – and more – in beautiful style. Every door is custom-crafted to exactly fit your opening, which means no trimming required. And since they’re entirely top-suspended, there’s no need for bothersome floor clips or pivots. Plus our exclusive steel hardware hinge system is designed to keep doors operating smoothly, quietly, and lends incredible strength and durability. It also means doors stay solidly in place, whether open or closed. As you’d expect from Woodfold, our Accordion Doors come in an array of hardwood, vinyl, paint, stain and laminate finishes. What is unexpected is how, once completed, your doors are delivered. Each is individually carton-packed or wood-crated to ensure everything possible is done to have it arrive at its destination the same way it leaves our doors. In perfect condition.

• FAQs

Read more...

Residential Room Dividers and Closet Doors - Wood Folding Custom Accordion Shutter Doors

• FAQs

Read more...

Natural Hardwood Color Chips

Birch	Cherry	Mahogany	Maple
	Oak	Walnut

Vinyl Laminate Color Chips

Woodgrain Vinyl Laminates

Birch	Nat oak	Light oak	Dark oak
Pecan	Teak	Mahogany	Walnut
	Cherry	Maple

Textured laminate

Chalk	Tahiti	Rattan	Amethyst

Solid Color Laminates

White	Tan	Gray

Vinyl Panel Connectors

Our carefully color coordinates its vinyl panel connectors as a standard feature. Combinations include: White with White, Chalk and Amethyst; Sand with Hardwood Birch, Hardwood Oak, Hardwood Maple, Maple Vinyl, Tan, Tahiti and Rattan; Silver with Gray Vinyl; Brown with all other body panels.

Accodion Wood Door Designer/Decorative Options

Are you looking for a colorful and cost effective solution to enhance and decorate your custom accordion or roll up doors? In addition to our standard colors and finishes our doors can be customized with laminates, murals, veneers, inserts, and custom logos. You can even have some types of wall covering materials applied to Woodfold doors.

Decorative doors can include murals or logos

Decorative doors add a lot of personality. Our decorative doors can transform any room with the image of your choice, and decorative doors can be used in a wide variety of architectural, commercial and residential situations. For example, a school might apply a world map to a room

divider, or a restaurant put their logo on a door.

Creating a decorative door that has a colorful mural or company logo is easy. Just send us a copy of your artwork, or choose an image from the Murals Your Way gallery. We then custom make your decorative door with the image applied to the face of the door. Please note that additional charges may apply for certain decorative door finishes, and extra production time may be required for certain types of decorative doors.

Custom Finish Services

With a long proud history in the custom finishing of fine wood products, our services include custom paint and stain finishes. Additionally, other custom materials can be arranged by asking us.

Acrylic Panels :

Visifold Series 440 & 540 doors available with .118" thick, transparent clear or bronze acrylic panels from Our inventory. Other .118" thick panel options available by quotation.

Read more...

The Portable Access Control, Traffic Control ,Easy to Carry in Truck .

Read more...

Read more...

Read more...

Our Folding Security Gates are quality product at a competitive price that meets or exceeds our customers' requirements.

Read more...

Custom Bookcase Shutter Doors: Residential Solutions

Custom Bookcase Shutter Doors: Commercial Solutions

Custom Bookcase Shutter Doors: Security Solutions

Product Details

• Available in two widths: 54” and 66”
• Constructed entirely from durable ¾“ ApplePly™ that supports loads up to 500 pounds
• Available in three hardwood veneers (Oak, Cherry and Maple), unfinished or finished in environmentally safe clear and customized stains and paints
• Includes a valance matched to your chosen finish
• Includes two fixed shelves at center and bottom, with four additional, quickly adjustable shelves
• Offers superior strength due to a piano-hinge that runs the entire length of the bookcase
• Assures incredible longevity and smooth operation thanks to a heavy-duty steel roller system with anti-binding block
• Includes steel upper wall guide with multi-position pre-drilled mounting holes
• Includes our exclusive steel hardware hinge system, adjustable for either left or right, two-position pivot
• Provides ease of entry with a strong, low-profile, steel threshold

1. What size of accordion door do you offer?
2. How do I measure openings for your Accordion door?
3. When measuring for your Accordion door, do I make any deductions for actual door size?
4. How much does a your Accordion door weigh?
5. How is an Accordion Door installed?
6. What kind of header is needed to handle the weight of your Accordion door?
7. How quickly can I get a  Accordion Door?
8. What type of warranty do you offer?
9. Why do series 140 and 240 closet doors need to be handed?
10. What does "stack left" and "stack right" mean?
11. How does your curved radius track work, and how is it installed?
12. Explain the term"hat channel"?
13. What is a sliding jamb?
14. How do I specify two doors which close together?
15. Can your Accordion Door be installed directly to a suspended ceiling? If not, what kind of support is required?
16. Can your Accordion Door be repaired once it's installed?
17. Can your Accordion Door be painted on-site?
18. If I change my mind about color, can I repaint an Accordion Door?
19. Can I order a door with two different colors of vinyl, front and back?
20. Can I exchange or return my door?
21. Is it possible to shorten a Woodfold door?
22. What type of latch and lock options are available?
23. If I order a door with a key lock, can it be made compatible with my other locks?
24. Are Woodfold Accordion Doors sound rated?
25. Do you offer fire-rated doors?
26. Do your accordion doors fold perfectly flat?
27. Can your Accordion Door be used outside?
28. Are Woodfold Accordion Doors reversible?
29. What door works best in heavy duty installations?
30. What's the difference between a Woodfold Series 140 door and a Series 220 or 240?
31. What is an intermediate rolling post and when is it needed?
32. What is the maximum length per piece of track?

• Dual Walled Acoustical Accordion Partitions
• Used For Both Residential & Commercial Applications
• Field Sound Transmission Class: (FSTC) 33

A uniquely practical solution for space, sound and heat loss control, Our Series 3300 acoustic room partition is a smart alternative to similar, but much more expensive options. Perimeter-sealed, acoustic-lined and incorporating our exclusive heavy duty hardware system, this dual-walled partition functions beautifully in offices, churches, restaurants and hotel meeting spaces, anywhere needing moderate sound control. Series 3300 doors are available in a variety of handsome hardwood and Vinyl-Lam finishes, even alternate finish materials on each accordion door face.The 3300 series accordion door combines the proven durability of their exclusive hardware hinge system, rigid MDF body panels and sound liner to create a dual walled sound barrier. The 3300 series acoustical accordion door divider provides improved speech privacy between rooms. Practical applications for the 3300 series include offices, churches and restaurants where moderate sound control is desired, along with the flexibility and convenience of an accordion style partition featuring solid panels.

Product Specifications

• Panels: 4¼" wide by ¼" thick; available in Vinyl-Lam and hardwood veneer faces front and back
• Panel Connectors: Flexible vinyl, color-coordinated to panel selection
• Track: 2-7/16" x 1¾" aluminum, clear finish; heavy-duty aluminum ceiling guard with separate track available
• Sound Seal: Dual-wall doors with internal sound-absorbent material,flexible vinyl sweep strips mounted on top and bottom of the door; wood molding mounted on both sides of the track forming 11-5/8" wide sweep surface
• Wheels: 1-1/8" nylon wheels with ball bearings on steel axle

• 

  Lead Post: 2-7/8" x 4½" heavy-duty aluminum, color-coordinated to panel connectors,
• Jamb Molding: 2-1/8" wide by 15/16" deep aluminum
• Handle: Molded PVC with finger recess
• Latch: Deadlatch with thumbturn on two sides; keylock option available
• Width: Custom crafted to any width; intermediate rolling posts required on sections exceeding 15'
• Height: Vinyl-Lam up to 12'1"; hardwoods up to 10'1"
• Stacking Space: 2" per foot, plus 4½" for lead post

*Field Sound Transmission Class: The dual-walled Series 3300 Acoustical Partition has a field sound transmission class rating of (FSTC) 33. Field tests were performed by Bruck, Richards & Chaudiere, Inc. of Seattle, Washington following the procedures specified in ASTM designation E 336-90.

3300 Series Accordion Door/Shutter Options

• Heights 4' and less
• Made as a Pair or Double End
• Pull Rod
• Sliding Jamb Panel is used when you would like to hide the accordion door in a pocket
• Two piece aluminum ceiling guard and track ideally suited for acoustic ceiling installation
• Fire-Retardancy is available in light oak and chalk only

• Keyed lock one-side
• Keyed lock one-sided cylinder with pull
• Keyed lock two-sides
• Keyed lock two-sided cylinder with pull

• Non-Locking foot-bolt

Form To Order/ Estimate

If reducing noise is as important as adding good looks to a space, and economy's a factor too, here's the door most people turn to. Our Series 2100 single-wall acoustic partitions are ideally suited to spaces where, in addition to closing off part of a room, some degree of sound reduction* is desired. In restaurants, churches, offices, assisted living facilities, almost anywhere, this durable accordion door serves to reconfigure a space at a moment's notice, minimize distracting noise, and also, thanks to full-perimeter seal system, lessen heat loss and air exchange between rooms.

Acoustical Folding Partition
Used For Both Residential & Commercial Applications

Field Sound Transmission Class: (FSTC) 21
The 2100 series acoustical folding door is a prefect way to reduce undesirable sound with minimal cost. This series also includes a perimeter seal designed to reduce heat loss from one area to another.

Product Specifications

• Panels: 4¼" wide by ¼" thick; available in Vinyl-Lam and hardwood veneer faces front and back
• Panel Connectors: Flexible vinyl, color-coordinated to panel selection
• Track: 2" x 1-1/8" aluminum, dark bronze or clear finish
• Sound Seal: Flexible vinyl sweep strips mounted top and bottom, with wood molding mounted on both sides of the track forming a 4-7/8" wide sweep surface
• Wheels: Nylon wheels on steel axle with ball bearings supplied as standard
• Lead Post: ¾" x 2¾" aluminum, color-coordinated to panel connectors
• Jamb Molding: 1-5/8" wide by 1" deep aluminum
• Latch: Deadlatch with thumbturn on two sides; keylocks or magnetic catch options available
• Handle: Molded PVC with finger access
• Width: Custom crafted to any width
• Height: Vinyl-Lam up to 12'1"; hardwoods up to 10'1"
• Stacking Space: 1¼" per foot, plus 2¾" for lead post

2100 Series Options

• Heights 4' and less
• Made as a Pair or Double End
• Pull Rod
• Sliding Jamb Panel is used when you would like to hide the accordion door in a pocket
• Hardwood Astragals
• Fire-Retardancy is available in light oak and chalk only

• Keyed lock one-side
• Keyed lock one-sided cylinder with pull
• Keyed lock two-sides
• Keyed lock two-sided cylinder with pull

• Non-Locking foot-bolt

Series 740: Folding Security Accordion Door Shutter Series 740

Product Specifications

• Panels: 4-1/4" wide solid or perforated aluminum in bronze, clear (silver) or gold
• Panel Connectors: Rigid vinyl with steel rods color-coordinated to panels
• Track: 1-1/8" x 1" aluminum, dark bronze, clear (silver) or gold finish; curvable option available
• Wheels: Nylon wheels on steel axle with ball bearings supplied as standard
• Lead Post: 3/4" x 2-3/4" aluminum, color-coordinated to panel connectors
• Jamb Molding: 1-5/8" wide x 1" deep aluminum
• Latch: Keylock two sides; other options available
• Handles: Molded PVC with finger recess
• Width: No limitation
• Height: Bronze and gold up to 8'1"; clear up to 10'1"
• Stacking Space: 1-1/4" per foot plus 2-3/4" for lead post
• Fire-Retardancy is not available

740 Series Options

• Heights 4' and less
• Made as a Pair or Double End Lead Post
• Pull Rod
• Curvable "I" Beam Track
• Gold Metal Components
• Sliding Jamb Panel is used when you would like to hide the accordion door in a pocket

The following allows for custom keying by your local locksmith:

• Keyed lock two-sides standard
• Keyed lock two-sides cylinder with pull
• Keyed lock one-side with 9" bolt with or without cylinder
• Keyed lock one-side double bolt floor to ceiling with cylinder

Intermediate Rolling Post for dividing doors into to manageable sections, plus providing a surface to attach the following foot-bolts:

• Non-Locking foot-bolt
• Foot-bolt with spring pin
• Locking dust proof strike

Product Specifications

• Panels: 4-1/4" wide solid or perforated aluminum in bronze, clear (silver) or gold
• Panel Connectors: Flexible vinyl color-coordinated to panels
• Track: 1-1/8" x 1" aluminum, dark bronze, clear (silver) or gold finish; curvable option available
• Wheels: Nylon wheels on steel axles with ball bearings supplied as standard.
• Lead Post: 3/4" x 2-3/4" color coordinated to panel connectors
• Jamb Molding: 1" wide x 3/8" deep aluminum
• Latch: Deadlatch with thumbturn two sides; other options available
• Handles: Molded PVC with finger recess
• Width: No limitation
• Height: Bronze and gold up to 8'1"; clear up to 10'1"
• Stacking Space: 1-1/4" per foot plus 2-3/4" for lead post

640 Series Accordion Door Options

• Heights 4' and less
• Made as a Pair or Double End Lead Post
• Thumbturn One-Side with deadlatch
• Magnet with strike plate
• Recessed Hat Channel
• Curvable "I" Beam Track
• Panels: Hardwoods or Vinyl Laminate panels
• Gold Metal Components
• Sliding Jamb Panel is used when you would like to hide the Accordion door in a pocket

The following allows for custom keying by your local locksmith:

• Keyed lock one-side
• Keyed lock one-side cylinder with pull
• Keyed lock two-sides
• Keyed lock two-sides cylinder with pull

• Non-Locking foot-bolt
• Foot-bolt with spring pin
• Locking foot-bolt

Finished on one-side and can be ordered unfinished or primed to accommodate paint or stain. We provide special custom finishes and have the ability to match existing finishes along with custom laminates such as Formica, Wilsonart, Pionite, and Navamar to name a few. Just name the wood species and we can have it fabricated.

Designed to provide security and be an aesthetic divider our 640 and 740 series doors incorporate the many design benefits desired in industrial, commercial, retail or hospitality settings. Our vertical panel frame channels and 4 1/4" wide full-height aluminum panels either solid or perforated provide security benefits.

Product Specifications

• Panels: Acrylic panels (transparent clear or bronze) inserted into aluminum side channels (clear, bronze, gold, sand or white) yielding 4¼" overall width.
• Panel Connectors: Rigid vinyl with steel rods color-coordinated to side channels
• Track: 1-1/8" x 1" aluminum, dark bronze, clear or gold finish; curvable option available
• Wheels: Nylon wheels on steel axle with ball bearings supplied as standard
• Lead Post: ¾" x 2¾" aluminum, color-coordinated to side channels
• Jamb Molding: 1-5/8" wide x 1" deep aluminum
• Latch: Keylock on both sides; other options available
• Handle: Molded PVC with finger recess
• Width: Custom crafted to any width
• Height: Up to 10'1"
• Stacking Space: 1¼" per foot plus 2¾" for lead post
• Fire-Retardancy is not available in this series of accordion door.

540 Series Options

• Heights 4' and less
• Made as a Pair or Double End Lead Post
• Pull Rod
• Curvable "I" Beam Track
• Gold Metal Components
• Sliding Jamb Panel is used when you would like to hide the accordion door in a pocket

The following allows for custom keying by your local locksmith:

• Keyed lock two-sides standard
• Keyed lock two-sides cylinder with pull
• Keyed lock one-side with 9" bolt with or without cylinder
• Keyed lock one-side double bolt floor to ceiling with cylinder

Intermediate Rolling Post for dividing doors into to manageable sections, plus providing a surface to attach the following foot-bolts:

• Non-Locking foot-bolt
• Foot-bolt with spring pin
• Locking dust proof strike

ADA Compatible

The 440 and 540 series may be ordered with steel hinge hardware, aluminum components and vinl extrusions finished in a gold color. Optional finishes include Clear, White, Bronze, and Sand.

Form for Estimate/ Order

ADA COMPATIBLE*

A new concept in better security is now in sight: Woodfold's Visifold Series 440 see-through commercial and retail security doors. Custom-crafted of heavy-duty acrylic panels and our exclusive steel hardware hinge system, this Series helps reduce annoying noise and dust while providing a welcome sense of openness. Designed to present an inviting entrance to retail and hospitability settings with moderate security needs, our Series 440 doors also serve as a unique decorative touch, and can be crafted to incorporate acrylic panels with those made of hardwood or Vinyl-Lam.

Product Specifications

• Panels: Acrylic panels (transparent clear or bronze) inserted into aluminum side channels (clear, bronze, gold, sand or white) yielding 4¼" overall width.
• Panel Connectors: Flexible vinyl panel connectors color-coordinated to side channels
• Track: 1-1/8" x 1" aluminum, dark bronze, clear or gold finish; curvable option available
• Wheels: Nylon wheels on steel axles with ball bearing supplied as standard
• Lead Post: ¾" x 2-¾" aluminum, color-coordinated to side channels
• Latch: Deadlatch with thumbturn two-sides; other options available
• Jamb Molding: 1" wide x 3/8" deep aluminum. Jamb mold supplied for positive door alignment
• Handle: Molded PVC with finger recess
• Width: Custom crafted to any width
• Height: Up to 10' 1"
• Stacking Space: 1 ¼" per foot plus 2 ¾" for lead post
• Fire-Retardancy is not available
• ADA Compatible

440 Series Options

• Heights 4' and less
• Made as a Pair or Double End
• Thumbturn One-Side with deadlatch
• Magnet with strike plate
• Recessed Hat Channel
• Curvable "I" Beam Track
• Panels: Hardwoods or Vinyl Laminate panels
• Gold Metal Components
• Sliding Jamb Panel is used when you would like to hide the
• accordion door in a pocket

• Non-Locking foot-bolt
• Foot-bolt with spring pin
• Locking foot-bolt

Estimate/ Order Form

The 240 series folding accordion door provides a functional way to easily divide a space. A folding door is economical, easy to install, and most importantly provides the fastest way to reconfigure a space .Finished on both Sides.Used For Both Residential & Commercial Applications.Vinyl Laminate is Standard, Available in Hardwood also.Decorative Murals Can Be Added To All Of Our Folding Doorsce without permanent dividers. Installations have included homes, offices, schools, restaurants, nursing homes, funeral homes and any where that flexibility is desired.

Product Specifications

• Panels: 4¼" wide by ¼" thick; available in Vinyl-Lam and hardwood veneer faces front and back
• Panel Connectors: Flexible vinyl, color-coordinated to panel selection
• Track: 1-1/8"x 1" aluminum, dark bronze or clear finish; curvable option available
• Wheels: Nylon wheel on steel axle with ball bearings supplied as standard
• Lead Post: ¾" x 2¾" aluminum, color coded to panel connector
• Jamb Molding: 1" wide x 3/8" deep aluminum
• Latch: Deadlatch with thumbturn on both sides; keylocks or magnetic catch options available
• Handle: Molded PVC with finger recess
• Width: Custom crafted to any width
• Height: Vinyl-Lam up to 12'1; hardwoods up to 10'1"
• Stacking Space: 1¼" per foot, plus 2¾" for lead post.

• Vinyl Laminates to 12'1", Hardwoods available to 10'1"
• Widths: Custom made to any width.
• Wheels: Nylon wheels with ball bearing roller on steel axles
• Lead Post: 3/4" x 2-3/4" heavy-duty aluminum with interlocking
• jamb mold supplied for positive folding door alignment
• Latch: Thumbturn two-sides with deadlatch supplied as standard
• Stacking: 1-1/4" per lineal foot plus 2-3/4" lead post
• Fire-Retardancy is available in light oak and chalk only
• All Necessary Hardware And Materials Shall Be Provided For Normal Installation

240 Series Folding Door Options

• Heights 4' and less
• Made as a Pair or Double End Lead Post
• Thumbturn One-Side with deadlatch
• Magnet with strike plate
• Recessed Hat Channel
• Curvable "I" Beam Track
• Gold Metal Components
• Hardwood Astragals
• Sliding Jamb Panel is used when you would like to hide the accordion door in a pocket

• Keyed lock one-side
• Keyed lock one-side cylinder with pull
• Keyed lock two-sides
• Keyed lock two-sides cylinder with pull

• Non-Locking foot-bolt
• Foot-bolt with spring pin
• Locking foot-bolt

Estimate and Order Form

SERIES 240 Accordion Wood Door Drawings (PDF)

• Shop Drawing 1
• Shop Drawing 2
• Shop Drawing 1 and 2
• Surface Track
• Recessed Track
• I Beam Track
• Mounting Panel
• Door Types
• Stack Dimension
• Lead Post & Handle
• Rolling Post
• Sliding Jamb Option
• Multiple Meeting Option
• Privacy Latch
• Keylock
• Single Keylock
• Double Keylock

Residential Applications As Room Dividers

ADA COMPATIBLE*

Our Series 220 room divider door is the ideal choice when you're looking for flexibility of use, and occasional privacy. Finished on both sides and featuring hardware almost identical to our heaviest-duty system, this Series serves as a divider and helps conserve heat in settings ranging from family recreation areas and galley kitchens to conference rooms and hotel banquet halls - in any space where the door is viewed from both sides. The view will, of course, be appreciated - Series 220 doors are crafted of glowing hardwood or striking Vinyl-Lam finishes. Result: a divider door as handsome as it is hardworking.

220 Series Details

• Heights: Custom made to 8'1" (97")
• Widths: Custom made to 8' (96")
• Wheels: Lexan axles with nylon wheels
• Handle: Has been integrated into the lead panel as a "swept-wing" full panel handle
• Catch: Heavy-duty magnet
• Stacking Space: 1-1/4" per lineal foot plus 7/8" for "swept-wing" handle
• Fire-Retardancy is available

220 Series Options

• Heights 4' and less
• Custom width doors
• Hardwood Astragals
• Single door with "swept-wing" handles on both ends
• 3/4" Round track moulding on both sides
• Custom paint finishes
• Fire retardent core available with light oak or chalk Vinyl-Laminates

Product Specifications

• Panels: 4¼" wide by ¼" thick; available in Vinyl-Lam and hardwood veneer faces front and back
• Panel Connectors: Flexible vinyl, color-coordinated to panel selection
• Track: 1-1/8" x 1" aluminum, dark bronze, clear or gold finish
• Wheels: Nylon wheels on Lexan axle
• Handle: Full-length sweptwing handle attached into first panel and color-coordinated to connectors; specify left or right stack
• Catch: Magnet with strike plate
• Width: Up to 8'0"
• Height: Up to 8'1"
• Stacking Space: 1¼" per foot, plus 7/8" for sweptwing handle
• Note: Series 220 functions as a single door only (no pairs), without keylock options

Order and Estimate Form for Accordion Doors

SERIES 220 ACCORDION DOOR DRAWINGS (PDF)

• Shop Drawing
• Surface Track
• Mounting Panel
• Door Types
• Stack Dimension

Generally Used For Residential Applications As Closet Folding Doors / Accordion Door

ADA COMPATIBLE*

• Finished On One Side Only
• Stacks In A Minimum Amount Of Space
• Stays Put In Either The Open Or Closed Position
• The 140 series accordion doors incorporate our exclusive Pin-hinge hardware for added strength and durability with a modified "swept-wing" style handle.
• This is a very efficient design solution developed to take advantage of the folding door method of door construction. The Series 140 accordion door is designed for use in areas where only one good side is needed such as a wardrobe area, closets, or a utility room.

Factory finished panels are available in either Natural Hardwood, for visual warmth, or a Vinyl Laminate as standard. A mural can be added to all series of accordion doors.

Product Specifications

• Panels: 4¼" wide by ¼" thick; available in Vinyl-Lam and hardwood veneer faces with utility back
• Panel Connectors: Flexible vinyl, color-coordinated to panel selection
• Track: 1-1/8" x 1" aluminum, dark bronze, clear or gold finish
• Wheels: Nylon wheels on Lexan axle
• Handle: Full-length sweptwing handle attached into first panel and color-coordinated to connectors; specify left or right stack
• Catch: Magnet with strike plate
• Width: Up to 8'0"
• Height: Up to 8'1"
• Stacking Space: 1¼" per foot, plus 7/8" for sweptwing handle
• Note: Series 140 functions as a single door only (no pairs), without keylock options

SERIES 140 Drawings(PDF)

• Shop Drawing
• Mounting panel
• Door Types
• Stack Dimension

Read more...

1. What are your shutters made of?
2. What louver sizes are available?
3. Do you make special shapes, such as fan tops, slant tops, etc?
4. Do you make raised panel and fabric insert shutters?
5. How do you finish your shutters?
6. Do you have standard colors or do you offer custom finishing?
7. What is your production time?
8. Can you rush an order?
9. How do you price your product?

Read more...

Read more...

An age-old favorite made even better by today's technology, Our Traditional Shutters are equally at home in both the quaintest country cottage and sleekest, trendiest office suite. Our raw materials and machining processes ensure unmatched product integrity, yes. But it's the skill of our people who turn a select piece of hardwood into a flawlessly finished product, who hand-craft specialty solutions to fit any shape or size of opening, who, employing the same dedication they apply to our Plantation Shutters, create true works of art made to last a lifetime.

Our Custom Hardwood Traditional Shutters are engineered, crafted and finished to provide a lifetime of smooth, flawless operation. In every step of fabrication, from machining through finishing and packaging for shipment, each order is checked and rechecked to ensure proper sizing. Also, every order leaves our facility in a custom-built-to-size crate, so upon arrival at its destination, it's in pristine condition.

Product Details

* Panel Thickness: 3/4" also available
* Panel Width: 8" to 26"
* Top and Bottom Rail: 9/16" thick; minimum 2" wide
* Stile: 3/4" thick, 1-3/8" wide
* Louver Sizes: 1-1/4"
* Tilt Bar: 3/8" thick; 5/16" wide
* Finishes: Standard and custom paints and stains
* Standard Ship Time: 3 to 4 weeks

Read more...

Bring home the best of both worlds: shutters that evoke the slow-paced graciousness of a by-gone era, yet stand up to the wear and tear of today's high-energy lifestyle, beautifully. The perfect fit for any setting, any room, any décor, Our Broadview series of Plantation Shutters reflect the essence of our company. They're precision hand-crafted of the finest hardwoods - painstakingly finished to a furniture-quality sheen. And we are experts at crafting specialty shapes and sizes for virtually any architectural challenge. Like every creation, including our Traditional Shutters, we carefully cradle each order for shipping to assure safe delivery.

Our Custom Hardwood Plantation Shutters are designed to provide greater louver control, enhanced viewability and a lifetime of smooth, flawless operation. Moreover, absolute precision of sizing is ensured by checks in every step of fabrication, finishing and shipping, which explains our reputation for problem-free installation. Also, every order is protectively wrapped and packed in its own custom-built crate to assure its arrival in perfect condition.

Hardwood Plantation Shutters Product Details

• Panel Thickness: 1-1/16"; 3/4" also available
• Panel Width: 9" to 48"
• Top and Bottom Rail: 13/16" thick; minimum 3-3/8" wide
• Stile: 1-1/16" thick; 2" wide
• Louver Sizes: 1-7/8"; 2 1/2", 3 1/2", 4 1/2", 5 1/2"
• Tilt Bar: 5/8" thick; 1/2 wide
• Finishes: Standard and custom paints and stains
• Standard ship time: 3 to 4 weeks

Read more...

Nothing adds more style and character to a home or office than custom-crafted hardwood shutters, and no one offers greater choice or finer quality than us. Whether the setting calls for the classic elegance of our Plantation Shutters or the friendly warmth of our Traditional styling, you're assured of the finest in furniture-quality materials made to last a lifetime. We’re able to meet virtually any architectural challenge  -- arched or slanted windows, circular openings, French door applications. And our finishing techniques, either staining or painting, add grace to every room.

Read more...

Frequently Asked Questions

• Can your Roll-Up Door be painted?
• Do you offer custom match finishes?
• How can I get a quote on a Woodfold Roll-Up Door?
• How do I measure an opening?
• What wood species can I choose from?
• What sizes are available in your Roll-Up Door line?
• What about hood size?
• Is a hood required?
• I'm confused. What's the difference between inside, between-wall and outside mounts?
• Are your Roll-Up Doors as easy to operate as they look?
• What happens if I have a problem with a Roll-Up Door?
• Are your Roll-Up Doors guaranteed?
• What types of latches can I choose from?
• How are thumb turns and key locks mounted? What about slide bolts?
• Can I change the location of a latch or lock - move it front to back for example - once my Roll-Up Door is onsite?
• How quickly can I get a Woodfold Roll-Up Door?
• Are your Roll-Up Doors available with fire rating?
• Are Roll-Up Doors available with sound ratings?
• Can I remove slats once a door arrives on site?
• What type of support is required in a door opening?
• Can I order metal guide rails?
• How can a motorized Roll-Up Door be operated in case of a power failure?
• What wiring requirements should I know about if I purchase a motorized door?
• What's the difference between roll-up doors, rolling shutters, coiling grills and tambour doors?
• What is a Pack Out?
• What is a Fascia?

• Commercial Applications

• Residential Applications

• Hardwood Options

• Roll Up Door Order Worksheet.pdf

• FAQ's

Hardwood Options

Our Wood  Roll-Up Shutter Doors are custom-crafted of the finest natural hardwoods, including:

• Oak
• Maple
• Birch
• Mahogany
• Cherry

We can also build our Wood  Roll-Up Shutter Doors in nearly any other hardwood you’d prefer. Simply talk with your distributor, or call us direct.

Stains & Finishes

While it’s our woodworking process that sets ourcustom Roll-Up Doors apart, you’ll also appreciate the absolute consistency of  factory finish. Each piece of every door is individually finished prior to assembly in order to assure flawless coverage on the top, bottom and ends. Plus, all edges are sealed, so they’re protected against moisture problems which can lead to warping and seriously hamper both the operation and appearance of the door.

Our use of the finest natural hardwoods enables us to apply rich, gorgeous finishes – clear lacquers, custom stains and/or paints – that truly bring out their stunning appearance. In addition to standard stains and paints, we can custom match our finishes to your existing millwork or décor.

Read more...

Roll Up Door Order Worksheet.pdf

Read more...

Read more...

• Commercial Applications

• Residential Applications

• Hardwood Options

• Roll Up Door Order Worksheet.pdf

• FAQ's

• Minimum Accessories Required for any Installation:Regular Lock and Ball Caster.
• Accessories Required for Direct Mounting on Window Frame : Regular Lock and Ball Caster.
• Additional Accessories required for Distance Mounting from Window Frame: "L" bracket, Post and Feet
• Additional Accessories for two Gate Closing in Middle : "Deep"U" Bracket, Deep"T" bracket,Shoot Bolt

Read more...

Read more...

Distinctive Looks, Distinctive Protection.

Add an original touch to your decor with this distinctive sliding grill,folding grill model. Good-looking, rugged,

and durable, it is ideal for schools, offices, hospitals and reception desks in public buildings.

Architectural Specifications and Technical Details of Folding Security Grille "System S-525"

Part 1 General
1.01 General
A. Supply and install where indicated folding aluminum closure model "SYSTEM S-525" as supplied by Vrinda Inc.
TEL.: 1-877-874-6321
FAX: 1-877-874-6564

1.02 Exclusions
A. Work not included in this section. Preparation of the opening, overhead track supports, storage pockets, miscellaneous trim and field painting.

1.03 Submittals
A. Submittals (shop drawings, installation instructions, operation and maintenance instructions) shall be in accordance with general instructions.

Part 2 Product

2.01 Model type
A. "SYSTEM S-525" by  Vrinda Inc.

2.02 Curtain
A. The top and bottom of each section will be fitted with an aluminum panel 4" (101mm) high. This panel will consist of an aluminum extrusion 1/16" thick and composed of modules with a 15° angle between them to facilitate the operation of the closure. The curtain is constructed of vertical rods of 5/16" (8mm) diameter spaced out at every 3" (76mm). These rods are linked together by 2" (51mm) modules spaced vertically every 14" (356mm), by aluminum sleeves of 1/2" (12.7 mm) in diameter.

2.03 Locking.
A. Lead post shall be equipped with a hook bolt lock with supplied cylinders each side.
B. Lead post shall engage a full height wall jamb.
C. Trailing post shall be self-locking at the top and bottom inside the storage pocket.
D. Free floating intermediate posts shall be located at all curves and at intervals not exceeding 10 feet (3M), 6 feet (2M) for counter top units. Intermediate posts shall be equipped with self-adjusting spring loaded drop bolts activated from the inside only. Drop bolts shall engage dust proof stainless steel receptacles.


2.04 Track
A. Curtain shall be hung from an overhead track 1-5/16" (33mm) wide by 1-9/16" (40mm) high. Track shall be aluminum 6351 alloy tempered to T6.
B. Curves where required shall be 14" (355mm) radius standard.

2.05 Stacking
A. Stacking shall not exceed a depth of 1.15" per foot of closure width plus 3" for each post (lead, end or intermediate). (95mm/lin. M. + 76mm per post). Full egress doors add 7" (176mm).

2.06 Finish
A. Finish shall be standard (clear anodized or acrylic paint in white, black, medium bronze #40, light bronze #26.

Part 3 Installation
3.01 Inspection.
A. Verify that all preparation work has been completed by other trades.
B. Verify dimensions of opening prior to installation.

3.02 Installation
A. Closure as per printed instructions from  Vrinda Inc and approved shop drawing.
B. Clean and adjust closure to ensure smooth operation.

Options

Locking (section 2.03)
Top and bottom lock posts with key cylinders one or both sides are available for either end of the curtain.
Large sections may be divided by incorporating bipart units as intermediate posts.
Second hook bolts on lead, end or biparts (recommended for closures over 12’ (3660mm) high).
High security lock cylinders (Best, Medeco, U change It).
Architect to decide side of lock cylinders.

Track (section 2.04)
10" (255mm) radius curves (indicate location on plans).
Special radius curves (indicate location and radius on plans).

Finish (section 2.06)
Architect may select special finish. - (Extra cost).

Egress compliance
Bi-part egress door. (Bi-part post with interior thumbturn activation). Ideal choice. Specify 3’ (915mm) or 6’ (1830mm) of glazed panels (Royal or Impact) to protect the thumbturn.
Full egress door 36" x 80" (914mm x 2032mm) (where required by local building code). This egress door should be used only when the bipart egress is refused. Extra cost.

Read more...

Proven Security... and Cost-effectiveness

This attractive, openstyle sliding grill model stands out for its ruggedness. This Sliding folding grill can be used in many settings including schools, food fairs, stadiums, hospitals, warehouses, etc.

Read more...

This attractive, openstyle model stands out for its ruggedness. It can be used in many settings including schools, food fairs, stadiums, hospitals, warehouses, etc.

Read more...

Read more...

Read more...

Read more...

Read more...

Visibly Elegant Protection


This high performance tempered glass sliding grill/folding grill model offers excellent visibility and exceptional protection. Perfect for banks and stores, or any other location requiring both maximum visibility and secure closing.

Read more...

How to Create Ceiling Support Structure ? Guide to Create Ceiling Support Structure for Folding Sliding grille

Read more...

Read more...

Read more...

Read more...

]]> vrinda.canada@gmail.com (Administrator) Thu, 05 Apr 2007 15:26:42 GMT http://www.foldingsecuritygate.com/Folding-Sliding-Grill-Door/folding-sliding-grille-door-vertical-section.html http://www.foldingsecuritygate.com/Folding-Sliding-Grill-Door/sliding-grill-bi-part-egress-door.html

Read more...

Read more...

Read more...

Read more...

Read more...

Read more...

Read more...

Read more...

Technical Details: